| Prev Next |
MANOMETER WELL TYPE WALL MOUNT and Accessories
| Manometer body is of aluminum channel construction 7/16” outside diameter glass tubing is yoke packed with viton gaskets at each end block and is supported at spaced intervals to prevent tube distortion Two Ω” female pipe connections are provided on the top side of the well; one outlet is normally used for the high pressure manometer connection, while the other, provided with a plug, is used as the well fill connection Scale is graduated in linear inches and tenths of manometer fluid Scale is graduated to correct for the drop in well level and is the full width of the instrument Scale is adjustable for zero indicating fluid level by means of a non-slip, flexible shaft adjustment located in the lower end block and operated from the front of the instrument Transparent plexiglass cover protects the unit from dust and moisture Standard pressure connections in the upper end block and at the manometer well for connecting the instrument are Ω” female pipe connections Suitable drain, fill and vent plugs are furnished with each unit Red gauge oil (Model A-103) not supplied with manometer, must be ordered separately |
||||||||||||
|
||||||||||||